SM940

Model			SM-940
Dimensions			96(W) × 48(H) × 100(D)
Panel size			92(W) × 45(H)
Power Supply			AC100~240V(permissible power range ± 10%) 50/60 ㎐
Power Consumption			6.0W, MAX 5VA
Indication Form			7segment LED DISPLAY the Upper: PV(green), the Lower: SV(red)
Input			Sensor input : Thermocouple : K(CA), J, R, E, S, B, T, C(permission resistance of 100Ω and                      below per a wire)                      Thermoscope resistor(RTD) : DIN PT 100Ω, JIS PT 100Ω(permission resistance                      of 5Ω and below per a wire)                      Power : DC 1~5V, 0~10V    Electric current : DC4~20mA A sampling cycle : 250㎳ Permission resistance of wire : Thermocouple : 100Ω and below    RTD : 5Ω and below per a wire                                               Power : 1KΩ and below Permission input power : within ±10V Measure : FULL SCALE within ±0.3% Remote input : working by the value that is stored on SV of this gauge through the input of DC4~                      20 outside
OUT1			A relay output  ㆍ contact capacity : 250 VAC 5A 30 VDC 5A  ㆍ contact constituent : 1C                      ㆍ control system : P.I.D control(conversion of direction/ inverse)                      ㆍ ON/OFF control(conversion of direction/ inverse) SSR output     ㆍ ON power : about 24VDC and above(when there is disconnection and load                         resistance 600and above, limits electric current of about 30mA)                     ㆍOFF power : 0.1VDC and below  ㆍA ratio cycle : 1~120/a second                     ㆍControl system : time ratio P.I.D Electric current, Power output ㆍcontrol of DC4~20mA electric current(conversion of direction/ inverse, slow start, with a built    in limit function of output upper and lower), transmission output (PV) ㆍcontrol output of DC1~5V power, transmission output of power (using 250Ω resistance)
OUT2			A relay output  ㆍContact capacity : 250 VAC 2A 30 VDC 2A  ㆍContact constituent : 1A                      ㆍControl system : ON/OFF control, SV different from Out1, setting up direction                         / inverse                      ㆍAlarm output : 6 kinds of alarm output and a heater disconnection alarm,                         waiting for alarm                      ㆍTimer output: 999minitues, seconds ON/OFF timer
OUT3			A relay output  ㆍ Contact capacity : 250 VAC 2A 30 VDC 2A  ㆍ Contact constituent : 1A                      ㆍ Control system : ON/OFF control , SV different from Out1, setting up direction                          /inverse                      ㆍAlarm output : 6 kinds of alarm output and waiting for alarm                      ㆍTimer output: 999minitues, seconds ON/OFF timer
OUT4			Electric current, Power output Option ㆍcontrol of DC4~20mA electric current(conversion of direction and inverse, slow    start, with a built in limit function of output upper and lower), transmission output    (PV) ㆍcontrol output of DC1~5V power, transmission output of power (using 250Ω    resistance) When the input is selected by remote, if Out4 is set in transmission output, sends the input remote value as it is
Remote control Transmission			RS485 transmission  ㆍNo. of connection lines : 1~99 Option                              ㆍTransmission distance : within 1.2km                              ㆍTransmission wire : two wires                              ㆍTransmission speed : selection among 2400, 4800, 9600BPS
Control of programmer room			Pattern 20segments program control
Control of Manual Electric current			Manual control by registered value of 20mA DC values
Inside noise			1KV R image and S image 1 ㎲
Relay durability			Mechanical : one million times    Electrical : three hundred thousands times
Temperature			0~50℃
Humidity			20~85%
Special feature			Selection of basic form PS485 transmission Multi-input/output function 3patterns 30segment program control Electric current, slow start, limit of electric current upper and lower ON/OFF timer(Out2,3)
Weight			330g