About Me

My photo
Future Sky Equipment is based in Dubai U.A.E., providing the wide range of automation and instrumentation equipment mainly diversified controllers, sensors, timers and counters, etc. to consumer and industrial community.

Future Sky Equipment: Featured Products

Sunday, January 30, 2011

GOS-6112/ 6103/ 6103C

Cursor Readout Analog Oscilloscope,GOS-6112/ 6103/ 6103C
gos-6103-s.jpg
FEATURES
100 MHz, Dual Channel, Delayed Sweep
Built-in 6 Digit Universal Counter (GOS-6103C)
10 Sets Memory for Front Panel Setting Save & Recall (GOS-6103/GOS-6103C)
Time Base Auto-range (GOS-6103/GOS-6103C)
Cursor Readout with 7 Measurements
Panel Setup Lock of Digital-Control Functions
Buzzer Alarm
LED Indicators
TV Synchronization
Trigger Signal Output
Z-Axis Modulation Input
SMD Technology, High Stability and Reliability
SPECIFICATIONS

CRT
Type
6-inch rectangular type with internal graticule;
0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)
PhosphorP31
Accelerating Potential16 kV approx.(GOS-6103/GOS-6103C), 12kV approx.(GOS-6112)
IlluminationContinuously adjustable (GOS-6103/GOS-6103C)
Z-axis inputCoupling : DC
Sensitivity : 5V or more
Maximum input voltage : 30V(DC+AC peak) at 1kHz or less
Bandwidth : DC ~ 5MHz



VERTICAL SYSTEM
Sensitivity2mV ~ 5V / DIV,11 step in 1-2-5 sequence
Sensitivity Accuracy< 3% (5 DIV at the center of display)
Vernier Vertical SensitivityContinuously variable to 1 / 2.5 or less panel-indicate value
Bandwidth(-3dB)DC ~ 100MHz (2mV/DIV : DC ~ 20MHz)
Rise Time3.5nS (2mV/DIV : 17.5 nS)
Signal DelayLeading edge can be monitored
Max. Input Voltage400V (DC+AC peak) at 1kHz or less
Input CouplingAC, DC, GND
Input Impedance1MΩ+2%// approx. 25pF
Vertical ModeCH1, CH2, DUAL (CHOP/ALT), ADD, CH2 INV.
Bandwidth Limited20MHz
Common-Mode Rejection Ratio50 :1 or better at 50kHz
Dynamic Range8 div at 60MHz5 div at 100MHz (GOS-6112)
8 div at 100MHz (GOS-6103/GOS-6103C)



HORIZONTAL SYSTEM
Horizontal ModesMAIN (A), ALT, DELAY (B)
A(main)Sweep Time50nS ~ 0.5S / DIV, continuously variable (UNCAL)
B(delay)Sweep Time50nS ~ 50mS / DIV
Accuracy+ 3% (+ 5% at x 10 MAG)
Sweep Magnificationx 10 (maximum sweep time 5nS / DIV)
Hold Off TimeVariable
Delay Time1µS ~ 5S
Delay JitterBetter than 1:20000
Alternate SeparationVariable



TRIGGER
Trigger ModesAUTO, NORM, TV
Trigger SourceCH1, CH2, LINE, EXT
Trigger CouplingAC, DC, HFR, LFR
Trigger Slope"+" or   "-" polarity or TV sync polarity
Trigger Sensitivity

Mode

Frequency

INT

EXT

AUTO

10Hz~20MHz
0.35 DIV
50 mV

20MHz~100MHz

1.5 DIV

150 mV

NORM

DC~20MHz

0.35 DIV

50 mV

20MHz~100MHz

1.5 DIV

150 mV

TV

sync signal

1 DIV

200 mVpp
TV SyncTV-V, TV-H
Max. External Input Voltage
400V (DC+AC peak) at 1kHz
External Input Impedance
1MΩ + 5%, // approx. 25pF



X-Y OPERATION
ModeX-axis :selectable CH1, CH2, EXT
Y-axis :selectable CH1, CH2, CH1 and CH2
Sensitivity Accuracy2mV ~ 5V/DIV+3%; EXT : 0.1V/DIV+ 5%
X-axis BandwidthDC ~ 500kHz (-3dB)
Phase Error3º or less from DC ~ 50kHz



OUTPUT SIGNAL
Trigger Signal OutputVoltage : approx. 25mV/DIV into 50Ω
Frequency response : DC ~ 10MHz
Calibrator Output1kHz Squarewave, 2Vpp+2%



CURSOR READOUT FUNCTION
Cursor Measurement FunctionΔVΔV%ΔVdBΔT1/ΔTΔT%Δθ
Cursor Resolution1 / 100 DIV
Effective Cursor RangeVertical : + 3DIV ; Horizontal : + 4DIV
Panel Setting DisplayVertical : V/DIV(CH1,CH2), UNCAL, ALT/CHOP/ADD, INV, probe factor, AC/DC/GND
Horizontal : S / DIV(MTB,DTB), UNCAL, x 10MAG, delay time, HO
Trigger : source, coupling, slope, level, TV-V, TV-H
Others : X-Y, lock, save/recall MEM 0-9(GOS-6103/GOS-6103C)



AUTO MEASUREMENT FUNCTION             (GOS-6103C)
Parameter FunctionFREQ, PERIOD, +WIDTH, +DUTY ( + or - polarity selected by trigger slope)
Display DigitsMax. 6-digits, decimal
Frequency Range50Hz ~ 100MHz
Accuracy1kHz ~ 100MHz : +0.01%50Hz ~ 1kHz : +0.05%
Measuring Sensitivity>2 div (Measuring source selected from CH1 and CH2 as synchronous signal sources)



SPECIAL FUNCTION
TIME/DIV Auto RangeProvided (GOS-6103/GOS-6103C)
Panel Setting Save & Recall10 sets (GOS-6103/GOS-6103C)
Panel Setups LockProvided


POWER SOURCEAC 100V / 120V / 230V + 10%, 50 / 60Hz


ACCESSORIESPower cord x1,
Instruction manual x1,
Probes(10:1/1:1)x2


DIMENSIONS & WEIGHT310(W) x 150(H) x 455(D) mmApprox. 9kg

 

oscilloscope probe,oscilloscope,oscilloscopes,digital oscilloscope,high voltage test,oscilloscope digital,test equipment,fluke oscilloscope,oscilloscope price,storage oscilloscope

No comments:

Post a Comment

Shop #8 Naif road Millennium hotel Bldg
Dubai UAE Tel :00971 4 2731388 Fax 00971 4 2713819
E-Mail : sales@fse-automation.com
URL : www.fse-automation.com