CA-600

AC/ DC Current Clamp transmitter,CA-600

Features:
☆ Coverts any DMM to a current clamp

☆ Measure current without disconnecting circuit under test
☆ AC/DC 600A capability
☆ Dual Hall-effect sensors
☆ Accuracy DC:±2%+2A AC: ±3%+2A (50~400Hz)
☆ For use with any multi-meter at 200mV or 2V ranges for direct readout.
Input impedance at least 1MΩ
☆ Power on indicating
☆ Zero adjustment knob to compensate the hysteresis effect in
DC Measurements.)
☆ Transformer ratio:1000:1
☆ Output 1mV/A
☆ Jaw opening capability:30mm conductor
☆ Confirm to Safety:IEC 1010-1, IEC 1010-2-032,UL,CE approved.
☆ Low battery indication

SPECIFICATIONS        CE  Mark Safety Approval

Specifications : Measurement range: 600A DC or AC Accuracy: ±(2% reading +2A) Frequency Response (AC): 50Hz to 400Hz Input Resistance: 10kHz typical Maximum Conductor Size: 1.1" (30mm) General: Power Requirement: 9V battery Dimensions 7x2.75x1.3(178x70x33mm) Weight: 11 oz. (290g) Accessories: Battery, owners manual 　 CA-06 Adapter (Option) BNC- Female 4mm Banana post adapter for receiving Signal output from CA-60 and able to be monitored by oscilloscope.

3 phase meter,337 fluke,ac meter,ammeter,ammeters,amp meter,amp meter digital,ampere meter,analog meter,analog multimeter,analoge multimeter,analoges multimeter,analogue multimeter,clamp,clamp current,clamp meter,clamp meter ac dc,clamp meter digital,clamp meter fluke,clamp meters,clamp metre,clamp on meter,clamp on tester,clamp tester,current clamp,current clamp meter,digital clamp meters,digital meter,energy meter,fluke,meter digital,voltmeter