FG 32

3MHz  Function Generator + 60MHz Freq. Counter,FG 32

FEATURES:

FG 32 (6  waveforms , 6 ranges ,  Freq. Counter)  :  specification   CE
Main Output
Frequency Range	0.5Hz ~ 3MHz in 6 ranges , 5 digits LED display, High resolution 0.001Hz  ，use rotary switch to select ranges
Waveform	6 Waveforms ( Sins, Square, Triangle, Ramp, + Pulse, - Pulse), Use rotary switch to select waveform
Stability	0.1% after 15 minutes;　　0.2% after 24 hours
DC OFFSET	+/- 10 V with pull Adjust.  switch  ;  + - 10V( No load)， + - 5V(50Ω Load)
Ramp
Frequency Range	0.5Hz ~ 2.5MHz， Use 5 digits LED display
Max. Resolution	0.001Hz
Symmetry	50%(Rise waveform)  to 50%( Fall waveform) Distortion＜1%(1Hz ~ 100KHz)
Distortion	＜1%(1Hz ~ 100KHz)
Triangle
Frequency Range	0.5Hz ~ 3MHz，   Use 5 digits  LED display
Max. Resolution	0.001Hz
Symmetry	50%(Rise waveform)  to 50%( Fall waveform) Distortion＜1%(1Hz ~ 100KHz)
Distortion	＜1%(1Hz ~ 100KHz)
Sine Ware
Frequency Range	0.5Hz ~ 3MHz，Use 5 digits  LED display
Max. Resolution	0.001Hz
Symmetry	50%(Rise waveform)  to 50%( Fall waveform) Distortion＜1%(1Hz ~ 100KHz)
Distortion	＜1%  to100KHz
Harmonic Ratio	＜30dB  to3MHz
Freq.  Response	＜0.1dB  to 100MHz　  ＜1dB  to 3MHz
Square
Frequency Range	0.5Hz ~ 3MHz，Use 5 digits  LED display
Max. Resolution	0.001Hz
Symmetry	50%(Positive half circle) to 50%( Negative half cycle) distortion ＜1%  to 100KHz
Rise Time	＜60nS
+ Pulse
Freq. Range	0.5Hz ~ 3MHz，Use 5 digits  LED display
Max. Resolution	0.001Hz
+ Pulse width	0.4sec ~ 100nS(Continously variable)
Symmetry	50%(Positive half circle) to 50%( Negative half cycle) distortion ＜1%  to 100KHz
Rise Time	＜60nS
- Pulse
Freq. Range	0.5Hz ~ 3MHz，Use 5 digits  LED display
Max Resolution	0.001Hz
- pulse width	0.4sec~100nS
Symmetry	85%(+ time base) to 15%(- Pulse) distortion ＜5% to 100KHz
Fall time	＜60nS
Main Output
Output Impedance	50Ω， Distortion ＜2%
Max. Output	20Vp-p( No load)，0.05Vp-p(50Ω Load)　　Distortion： + - 0.5V
Min. Output	0.1Vp-p( No load)，0.05Vp-p(50Ω load)
Attenuator	-20dB  Attenuator ; Attenuation ＜2%
SYNC OUTPUT
Output Impedance	50Ω，Distortion ＜2%
Output Level	TTL Level ＞3Vp-p Fix Amplitude
Rise Time	＜40nS
VCF  Input
Input Level	0~10V Input
Max. Freq. Variable Rate	1 : 1 ~ 1 : 1000
Input Frequency	DC ~ 1KHz
Sweep Sync Output
Output Impedance	1KΩ，Distortion ＜2%
Output Waveform	Linearity or LOG sweep  or LOG sweep slope
Output Amplitude	10Vp-p(load)，5Vp-p(51KΩ  Load)
Output Frequency	Continuously variable   , 0.2Hz ~ 100Hz
Sweep
Sweep Mode	LINEAR/ LOG  sweep,  Use switch selector
Sweep Rate	5sec ~ 10mS，Continuously variable
Sweep Width	1 : 1 ~ 1 : 100( To cooperate with Freq. Knob)
Frequency Counter
Display	5  digits 0.36 '   Red  LED display
Max. Resolution	0.001Hz
Unit	Hz/KMz
TIME BASE	20MHz
Temp. Characteristic	＜10PPM
Distortion	＜0.002% ± 一位
Power source	+5V / 160mA
Internal Counter
Range	Auto Range (0.001Hz/0.01Hz/0.001KHz/0.01KHz)　  Total 4 ranges , Resolution ，CPU select one to display
Counter Range	0.500Hz ~ 3000.0KHz，Auto select decimal point and display unit
Gate Time	Variable  0.25sec ~ 2sec  Auto set
Minimum Display	4 digits
External Counter
Max. Input Voltage	＜250Vrms
Input Impedance	1M  ,  Distortion ＜2%
Input Frequency Range	0.2Hz ~ 60MHz
Attenuation switch	x20(-26nB)
(COUPLING)	AC(HF)-- Measure  frequency over 100KHz through capacitor coupling DC(LF)100KHz FILTER-- Measure frequency under 100KHz direct coupling
(GATE TIME)	Variable 0.25sec ~ 10sec auto set by frequency
Range	Auto range(0.001Hz/0.01Hz/0.001KHz/0.1KHz/1KHz)  5 kinds of resolution  selected by CPU.
Minimum display	4 digits
Input sensitivity	＜30mVrms(1MHz)
Calculation  Time table for Frequency Display value/ Gate time

Standard Value	GATE TIME	INT	EXT.HF	EXT.LF
0.2Hz	10S	﹍	﹍	0.200Hz
0.5Hz	2S	0.500Hz	﹍	0.500Hz
1Hz	1S	1.000Hz	﹍	1.000Hz
10Hz	0.25S	10.000Hz	﹍	10.000Hz
100Hz	0.25S	100.00Hz	﹍	100.00Hz
1KHz	0.25S	1.000KHz	﹍	1.000KHz
10KHz	0.25S	10.000KHz	﹍	10.000KHz
100KHz	0.25S	100.0KHz	100.00KHz	100.0KHz
1MHz	0.25S	1000.0KHz	1000KHz	﹍
10MHz	0.25S	﹍	10000KHz	﹍
60MHz	0.25S	﹍	60000KHz	﹍

General Specifications:
Operating Temp.	Temperature: 0 ~ 40 C  ;   Humidity 0 ~ 90% RH
Power Source	AC 115V(+-10%) 50/60Hz , FUSE 600mA。 AC 230V　(+-10%) 50/60Hz , FUSE 300mA
Consumption	Max 25VA(Watt)
Heat Ventilation	Use fan  DC 12V/100mA
Safety Approval	CE,GS,UL,CUL  approval
Dimenstions	275mm(Width) x 90mm( Height) x 300mm(Depth)
Weight	2.5Kg( Net)
Accessories	Operation Manual, Test leads, Power cord.

function generators,function generator,function generator circuit,pulse generator,waveform generator,electrical generators,sine wave generator,rf generator,signal generation